Industry 4.0 and the digitalization of the production industry is an important topic worldwide. The more strongly the individual components communicate with each other in the production process, the more intelligent the digital engineering data must be. With the Electronic Product Catalog eCATALOGsolutions by CADENAS, component manufacturers can enrich their digital product data with all the necessary intelligent information for the design process. In order to effectively succeed in practice, well-known component manufacturers, such as ACE, Festo and SCHUNK, have formed the "Digital Twin" research group. A standard is being developed in this research group, organized by CADENAS and in cooperation with Siemens PLM and others so that 3D CAD data created via the Electronic Product Catalog can be used in NX format (e.g. grass pressure ring from ACE) optimally in the Siemens simulation software Mechatronics Concept Designer (MCD).

Selection, integration and motion simulation of a component

Simulations of systems clear the path towards Industry 4.0 and the Internet of Things

Software solutions for simulations, such as the Mechatronics Concept Designer (MCD) from Siemens PLM, contribute greatly towards Industry 4.0 and the Internet of Things (IoT). The MCD is thereby a consistent solution for automation development (integrated design and kinematic simulation) within the 3D CAD software NX. In conjunction with the so-called Digital Twin, it is possible to virtually test the commissioning of technical systems beforehand and digitally perform a careful coordination of control. This shortens the lead-time before the start of production.

Example of the simulation and virtual commissioning of a production plant

What constitutes an intelligent component and how is it prepared for simulations?

The geometry of a component alone is not sufficient for the design. With eCATALOGsolutions by CADENAS, the 3D CAD models contain intelligent functions that go beyond mere geometry and are thus well equipped for the age of Industry 4.0. First, the components must have kinematic information for simulations, such as direction of movement and degrees of freedom. Moreover, information about nozzle and connector as well as mass centers of each components are important, along with their physical values and limits such as maximum speed allowed, acceleration and deceleration.

So that further simulation software solutions can be used in the future, CADENAS defines metadata beforehand that corresponds to what is in the Electronic Product Catalog.

If you are interested in the Digital Twin research group or you wish to make your Electronic Product Catalog fit for Industry 4.0, then send us your query to [][/email]

Firmenkontakt und Herausgeber der Meldung:

Berliner Allee 28 b+c
86153 Augsburg
Telefon: +49 (821) 258580-0
Telefax: +49 (821) 258580-999

Telefon: +49 (821) 258580-0
Fax: +49 (821) 258580-999
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.