For several years now the surface quality of components made of ROMILOY® ASA/PA blends has been a key factor for customers placing their trust in these products. The new development of a special ASA/PA compound is a continuation of this positive trend.

This ROMILOY® product group is distinguished by its appearance and tactile properties on structured surfaces without any need for subsequent painting, its balanced technical properties and its exceptional chemical resistance. Components made from ROMILOY® ASA/PA, such as various interior panels, column claddings, seat belt exit trims as well as belt guides covers and child safety components, have long since been an integral part of automotive interiors. The material demands are extremely high, particularly for belt guides, which often have highly complex component geometries and the need to meet very stringent safety requirements. In addition to increased durability, a high level of dynamic load-bearing capacity must be guaranteed, while at the same time meeting optical and haptic requirements. The ASA/PA blend ROMILOY® 3020/11, which is already used in series production, fully meets these specifications and is among the materials most suited to this type of application.

ROMILOY® ASA/PA blends are ideal for use in components with large surfaces or, for example, for loudspeaker grilles. The reproduction accuracy of the given surface is outstanding. Retaining this quality even after several days of series production without time-consuming tool cleaning is a major advantage. As is well known, polyamide-containing compounds tend to form deposits depending on the tool geometry, sprue configuration, flow path conditions, grain geometry, residual moisture in the material, etc. These leave traces in the tool during production and impair the surface quality of the components. As a result, the tools must be cleaned regularly – usually! ROMIRA’s current development is an ASA/PA compound that allows components to be produced in the injection molding process for longer periods of time than was previously the case and without the formation of such deposits.

The insights gained during the development of this compound provide the basis for the further development of other PA-based ROMIRA blends. ROMIRA thereby provides its customers with a decisive contribution towards the optimization of the injection molding process.

Über die ROWA GROUP Holding GmbH

The ROMIRA GmbH was founded in 1990 and is an affiliated partner within the ROWA GROUP. As part of this strong combine, ROMIRA sets standards for technical plastics with its profound competence and synergetic know-how.

Firmenkontakt und Herausgeber der Meldung:

ROWA GROUP Holding GmbH
Siemensstraße 1-9
25421 Pinneberg
Telefon: +49 (4101) 70606
Telefax: +49 (4101) 706203
http://www.rowa-group.com

Ansprechpartner:
Dr. Daniela Tomova
ROMIRA
Telefon: +49 (4101) 706317
E-Mail: d.tomova@romira.de
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.