TerraX Extends Gold Mineralization Another 600 Meters In Phase 1 Of Drilling At Sam Otto

Phase 1 drill highlights from the Sam Otto South zone include:  7m of 2.93 g/t gold (within a broader interval of 40 m of 0.6 g/t Au) 14m of 1.36 g/t gold (within a broader interval of 34m of 0.64 g/t Au), 11m of 1.24 g/t gold, and 9m of 1.2 g/t gold (Figure 2). See Table 1 below for a complete summary:

Message from David Suda, CEO:

“The opportunity at Sam Otto has improved considerably with these results by extending gold mineralization to 2.5 kilometers of strike length. We are very much looking forward to the remaining results from Sam Otto and the nearby high grade target at Crestaurum. These targets are in close proximity to one another and represent the opportunity for TerraX to deliver an attractive resource next to excellent infrastructure in the town of Yellowknife.”

Technical Summary:

Gold mineralization encountered within the Sam Otto South target is located in shear zone structures 100 – 200 meters in width with strong sericite alteration and shearing. These geological characteristics are consistent with what is observed at the Sam Otto Main zone, clearly demonstrating the bulk tonnage of the 3.5 kilometer Sam Otto South structure. 

The nine drill holes from the 2018 and 2019 campaigns in the Sam Otto South zone together with surface channel samples have shown that higher grade lenses (27m of 2.14 g/t, for e.g.) are at a 10 – 15 degree angle to the main north – south trending structure and alteration zone. An additional three drill holes have been completed this summer with results pending to test for geometric continuity of the higher grade lenses at depth. TerraX is planning aggressive step out drilling along the Sam Otto structure next winter as it will provide 100% access along the trend.

Message from David Suda, CEO:

“The opportunity at Sam Otto has improved considerably with these results by extending gold mineralization to 2.5 kilometers of strike length. We are very much looking forward to the remaining results from Sam Otto and the nearby high grade target at Crestaurum. These targets are in close proximity to one another and represent the opportunity for TerraX to deliver an attractive resource next to excellent infrastructure in the town of Yellowknife.”

Technical Summary:

Gold mineralization encountered within the Sam Otto South target is located in shear zone structures 100 – 200 meters in width with strong sericite alteration and shearing. These geological characteristics are consistent with what is observed at the Sam Otto Main zone, clearly demonstrating the bulk tonnage of the 3.5 kilometer Sam Otto South structure. 

The nine drill holes from the 2018 and 2019 campaigns in the Sam Otto South zone together with surface channel samples have shown that higher grade lenses (27m of 2.14 g/t, for e.g.) are at a 10 – 15 degree angle to the main north – south trending structure and alteration zone. An additional three drill holes have been completed this summer with results pending to test for geometric continuity of the higher grade lenses at depth. TerraX is planning aggressive step out drilling along the Sam Otto structure next winter as it will provide 100% access along the trend.

Technical Appendix:

Holes were drilled normal to strike length and designed to cross mineralized structures at right angles. Reported intersection widths are estimated to be 90% of true width.

For the 6 holes reported today, TerraX collected 1106 samples for assay. Results ranged from below detection to 7.43 g/t Au. TerraX inserts certified standards and blanks into the sample stream as a check on laboratory QC. Drill core samples are cut by diamond saw at TerraX’s core facilities in Yellowknife.  A halved core sample is left in the core box. The other half core is sampled and transported by TerraX personnel in securely sealed bags to ALS Chemex’s (ALS) preparation laboratory in Yellowknife. After sample preparation, samples are shipped to ALS’s Vancouver facility for gold and ICP analysis. Gold assays of >3 g/t are re-assayed on a 30 gm split by fire assay with a gravimetric finish. ALS is a certified and accredited laboratory service. ALS routinely inserts certified gold standards, blanks and pulp duplicates, and results of all QC samples are reported.

The technical information contained in this news release has been approved by Joseph Campbell, Executive Chairman of TerraX, who is a Qualified Person as defined in "National Instrument 43-101, Standards of Disclosure for Mineral Projects.

About the Yellowknife City Gold Project

The Yellowknife City Gold ("YCG") project encompasses 783 sq km of contiguous land immediately north, south and east of the City of Yellowknife in the Northwest Territories. Through a series of acquisitions, TerraX controls one of the six major high-grade gold camps in Canada. Being within 10 km of the City of Yellowknife, the YCG is close to vital infrastructure, including all-season roads, air transportation, service providers, hydro-electric power and skilled tradespeople.

The YCG lies on the prolific Yellowknife greenstone belt, covering 70 km of strike length along the main mineralized break in the Yellowknife gold district, including the southern and northern extensions of the shear system that hosted the high-grade Con and Giant gold mines. The project area contains multiple shears that are the recognized hosts for gold deposits in the Yellowknife gold district, with innumerable gold showings and recent high-grade drill results that serve to indicate the project’s potential as a world-class gold district. 

For more information on the YCG project, please visit our web site at www.terraxminerals.com.

This news release contains forward-looking information, which involves known and unknown risks, uncertainties and other factors that may cause actual events to differ materially from current expectation. Important factors – including the availability of funds, the results of financing efforts, the completion of due diligence and the results of exploration activities – that could cause actual results to differ materially from the Company’s expectations are disclosed in the Company’s documents filed from time to time on SEDAR (see www.sedar.com). Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release. The company disclaims any intention or obligation, except to the extent required by law, to update or revise any forward-looking statements, whether as a result of new information, events or otherwise.