Supplier component discontinuation offensive: with this proactive service the KHS Group prevents costly machine downtimes at beverage plants and safeguards the long service lives of its filling and packaging machinery. With the availability of significant components becoming ever shorter, KHS’ discontinuation management scheme makes sure plant equipment stays up and running. This topic is gaining in importance in our digital age, where electronic components have shorter product life cycles. KHS not only brings its systems into line with the state of the art; operators also benefit from increased machine efficiency thanks to the use of new technologies.

A supplier’s component has undergone extensive further development; modified legislation calls for technical changes to be made: KHS Service is proactively tackling the problem of supplier components no longer being available and having to be replaced by new solutions. “We support our partners with our knowledge of any technical changes required to make sure that machinery continues to function and production runs smoothly at beverage bottling plant,” states Klaus Thatenhorst, head of the Standards Department at KHS. “By replacing the necessary components in good time, we ensure that our machines have long service lives and are thus sustainable.”

1,700 discontinuations in 2019 alone
KHS is able to react fast to any changes thanks to its holistic system of data management. Through this the systems supplier always knows which part on which machine belonging to which customer is likely to be affected by a discontinuation. This shortens response times should new components be needed. This is especially relevant when modifications have to be made to the machine’s engineering. In 2019 1,700 discontinuation solutions had to be found. Half of these required much more than a simple replacement, with intensive technical work necessary.

So that it is better prepared for the possible discontinuation of system parts, KHS is in regular close contact with its suppliers. It is already common knowledge, for instance, that robot manufacturer KUKA will only be supplying its current KR C2 controller until 2024; this has an impact on two series of KHS palletizers, among other machinery. The Dortmund engineering company is thus preparing itself and its customers for the pending conversion well in advance. The KHS Group is also able to offer fast and flexible systems and solutions for short-term discontinuations. Its parts management system stocks replacements for as long as possible for precisely this purpose.

Replacements for greater line efficiency
This may all initially sound like an expensive and time-consuming undertaking for the bottler yet it yields great benefits on several counts. By changing components quickly, the systems provider avoids unplanned downtimes over a longer period of time caused by the failure of a part no longer available. Furthermore, beverage producers can sometimes even improve line efficiency by installing new replacement components and at the same time carry out other useful upgrades. When converting a machine KHS Service not only removes and replaces discontinued components but also takes them back and reworks them.

In our digital day and age discontinuation management is an issue which is becoming increasingly important. While mechanical parts such as gear motors are usually available for up to ten years, according to the German Mechanical Engineering Industry Association (VDMA) some electronic components last just two years. Accordingly, the number of replacements for comparable parts required as a result of discontinuation is already currently increasing at shorter and shorter intervals.

Über die KHS GmbH

The KHS Group is one of the leading manufacturers of filling and packaging systems for the beverage and liquid food industries. The KHS Group includes the following companies: KHS GmbH, KHS Corpoplast GmbH and numerous subsidiaries outside Germany, located in Ahmedabad (India), Sarasota and Waukesha (USA), Zinacantepec (Mexico), São Paulo (Brazil) and Suzhou (China).
KHS manufactures modern filling and packaging systems for the high-capacity range at its headquarters in Dortmund, Germany, and at its factories in Bad Kreuznach, Kleve, Worms and Hamburg, where the group’s PET expertise is pooled. The KHS Group is a wholly owned subsidiary of the SDAX-listed Salzgitter AG corporation. In 2018 the KHS Group and its 5,081 employees achieved a turnover of around €1.161 billion.

Firmenkontakt und Herausgeber der Meldung:

KHS GmbH
Juchostr. 20
44143 Dortmund
Telefon: +49 (231) 569-0
Telefax: +49 (231) 569-1541
http://www.khs.com

Ansprechpartner:
Sebastian Deppe
Presse- und Öffentlichkeitsarbeit
Telefon: +49 (251) 625561-243
E-Mail: deppe@sputnik-agentur.de
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.

counterpixel