SHINING 3D supports 3D Sierra Leone with Multifunctional Handheld 3D Scanner EinScan Pro 2X Plus to create customized leg protheses for patients in the West African country. We are looking at how this project came to life and how SHINING 3D became a sponsor to change the lives of many by means of modern technology.

WORK

The Project of 3D Sierra Leone is built on 3 main pillars: Care, Research and Sustainability. Let´s find out how these values are put into practice!

Care

Many amputations occur in Sierra Leone due to complex wounds caused by traffic accidents, serious infections and the delayed patient presentation to the hospital. Besides, many amputees lost their limbs due to acts of violence during the Civil War (1991-2002). In Sierra Leone, the vast majority of people still do not have access to prostheses due to a lack of knowledge, availability of materials, trained staff and high costs. As a result, people often feel incomplete, which can lead to jealousy, insecurity, and depression. It is expected that having a prosthesis will enable them to blend in with the rest of the society and give them confidence. Access to 3D printing, even in its most basic form, can provide a useful and essential tool for manufacturing locally relevant medical aids, such as braces, splints and prostheses at reasonable cost.

Research

In collaboration with the Technical Medicine course at the University of Twente and under the guidance of the 3D lab at the Radboud University Medical Centre, a 3D lab has been set up in the Masanga Hospital in Sierra Leone. The 3D lab is run by Dutch Technical Medicine students, who collaborate with local physio therapists and prosthetic specialists. Dutch specialists are involved for any advice if necessary. By exchanging knowledge in the field of culture, medicine and technology, a partnership is created in which both the Dutch interns and the local population learn from each other.

In the future Sierra Leonean students should be also involved in the project, so that in addition to providing care, it will also become a training place for the local population.

Sustainability

For a project like this to run on its own, it must be made sustainable. This means that the prostheses must be affordable for the local population and the project can be carried out by the local population itself. To achieve this, the process of making the prostheses must be made as standardized and simple as possible. In addition, it is important to continue monitoring patients in the future to collect data and prove the sustainability.

METHOD

The process of designing and manufacturing customized protheses for the patients in Sierra Leone is in perfect alignment with SHINING 3D´s philosophy of 3D Digitizing – Intelligent Design – 3D Printing.

Making a 3D printed prosthesis can be done very fast. It takes around 20 minutes to scan the patient’s stump, this is including preparation of the scanner and clinical inspection of the stump. Then a design of the socket can be made using Meshmixer in 30 minutes. Subsequently, printing the socket takes between 16 and 20 hours. After this, the different prosthetic parts can be adjusted. The feet are locally made of wood. After a number of physiotherapy sessions, an aesthetic cover is made, so that the prosthesis looks like a real leg. Finally, the prosthesis is painted with XTC-3D in a brown color.

CASE EXAMPLES

On April 1, 2020, the American Journal of Tropical Medicine and Hygiene (Vol. 102, No. 4, pages 905-909) published the research results of the project. After the approval and authorization of the parties and their families, four cases of the "3D Sierra Leone" project have also been recorded.

Case 1: Full-arm prosthesis

In this case, the EinScan Pro 2X Plus Scanner provided great help to the team. By scanning the left and right arms of the patient, the staff not only obtained the 3D data of the left arm shoulder joint, but also the designer was enabled to quickly "connect" the intact right arm data to the left arm through the "mirror" function.

The 3D printed prosthesis is mainly used for aesthetic purposes, especially in public life the prosthesis serves as a real confidence booster.

Case 2: Arm prosthesis

The process of customizing the prosthesis also used 3D scanning and 3D printing technology. This prosthetic limb, in addition to a certain decorative effect can assist the user’s intact right hand to complete the tasks of daily living more efficiently.

Case 3: Arm splints supporting the healing of burned contractures

This child´s contractures have been burned. The burns were around a joint. If the burn starts to heal, the skin will contract causing the joint´s inability to further move. Doctors have performed a skin transplant. Skin from the abdomen has been placed in the elbow to provide more freedom of movement. After the operation it is very important that a splint is applied against the contracture, otherwise the wound will contract again. This operation combined with the splint ensures that the child will be able to use and extend the arm again.

The scar suppression splint shown above is customized by 3D scanning the patient’s body and 3D printed to match the treatment area achieving the effect of inhibition and orientation of scar growth by external pressure.

Case 4: Orthotic brace

This boy has kyphoscoliosis, an abnormal lateral curvature of the spine. Currently there are no medical devices or solutions for people with this condition in Sierra Leone. With the help of 3D Scanning and 3D Printing it was possible to provide a custom-made brace. In the near future this patient will be followed up in order to provide further medical assistance in his healing and growth process.

We are proud to see how the team of 3D Sierra Leone has incorporated our 3D Scanner to their workflow. And we look forward to see more lives in Sierra Leone improved through more shining ideas.

To learn more about 3D Sierra Leone visit: www.3dsierraleone.com

Über die Shining 3D Technology GmbH

SHINING 3D, founded in 2004, is pioneering independent research and the development of 3D digitizing and additive manufacturing technologies, owning over 300 patents and more than 100 copyrights. SHINING 3D is well-positioned in the market and has the capacity to manufacture 3D products at a large scale, offer powerful 3D digital technologies, and provide strong support service worldwide. SHINING 3D’s mission is to improve the efficiency of high-quality 3D modeling, to enable flexible production of high performance, complex structure parts, and to make 3D digitizing and additive manufacturing technologies accessible to all; from large multi-national corporations worldwide to at home hobbyist.

Providing solutions covering “3D Digitizing – Intelligent Design –Additive Manufacturing” for industrial manufacturing, healthcare & life science, product customization and education, etc. SHINING 3D promotes the 3D digital solution at a large scale by offering from end-to-end, easy-to-use and cost-effective products.

Firmenkontakt und Herausgeber der Meldung:

Shining 3D Technology GmbH
Breitwiesenstraße 28
70565 Stuttgart
Telefon: +49 (711) 28444089
https://www.shining3d.com

Ansprechpartner:
Lydia Jane Gerlach
International Marketing Specialist
Telefon: +49 (711) 28436372
E-Mail: lydia-jane.gerlach@shining3d.com
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.

counterpixel